Creating profiles for RGBWA

This is the forum, where you can add your wishes and feature requests.

Moderator: MADRIX Team

Locked
Ami
Posts: 1
Joined: Fri Sep 04, 2015 12:06 am

Creating profiles for RGBWA

Post by Ami »

I have several different LED fixtures I would like to create profiles for that are RGBWA. I have been unsuccessful with finding a work around. Do you have a solution for this? I am also interested to know if you are going to add the Amber in the fixture editor.

Example:
My 12 fixture RGBWA LED bar has a 60 channel mode intended for pixel mapping. In the fixture editor for the 5th channel I set 0-255 at 0. This looks slightly better than using a generic RGBW profile but not by much. I still dont have full color control.

Help!

Thanks,
Ami
- Luma Box Designs -
User avatar
Wissmann
Developer
Developer
Posts: 774
Joined: Fri Feb 23, 2007 3:36 pm
Location: Germany
Contact:

Re: Creating profiles for RGBWA

Post by Wissmann »

Hi Ami,
.
currently the MADRIX Software only up to 4 channels for Colors, like RGBW or RGBA.
For RGBWA fixtures you have to set up a fixture where only RGBW is controlable by the MADRIX Software and the A channel have to have a fixed value like 0 (Zero).
There is no simple solution to get full Control over all 5 Color channels by MADRIX in the Moment.
LEDs are nothing without control ;-)
Locked